Capacitor kVA required to bring the power factor of a 500 kW load 70% to 85% would be

Related MCQs

• A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of
• In a system if base load is same as maximum demand, the load factor will be
• In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be
• An engine operates at 1440 rpm under load whereas no load speed is 1500 rpm. The percentage speed drop of governor will be
• If the power factor of an electrical system is unity, it means
• All but one of the following possible steam generator test difficulties would cause the apparent performance to be poorer than it actually is. One item would make the performance look better than it really is. Identify the item
• Tidal power is the power generated from
• A petrol engine as compared to diesel engine (both running at full load) is
• Load curve is the plot of
• Thermal efficiency of a spark ignition engine at full load usually is in the range