In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be

Related MCQs

• A vacuum of 712 mm was obtained with the barometer reading 753 mm of mercury. The corrected vacuum to a standard barometer of 760 would be
• In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• A closed vessel contains air at 1.2 ata and 57?C. The pressure of air in the vessel if the contents of the vessel are cooled to 37?C would be
• In naturally aspirated engine the pressure inside cylinder at the end of suction stroke is
• The total length of 40 mid-ordinates on a simple steam engine indicator diagram is 17 cm. The pressure scale is 0.6 kg/sq-cm. The mean effective pressure would be
• Capacitor kVA required to bring the power factor of a 500 kW load 70% to 85% would be
• Air fuel ratio in a petrol engine fitted with dirty air cleaner as compared to that with clean air clearance will be
• The function of a condenser in a steam power plant is