In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become

Related MCQs

• In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be
• The maximum horse power of a 150 CC scooter engine is around
• A heat exchanger that can remove fixed quantity of heat from a system is available where should it be installed for best economy
• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• In centrifugal pumps suction head is
• In naturally aspirated engine the pressure inside cylinder at the end of suction stroke is
• A fuel of octane rating 85 matches the antiknock qualities of mixture consisting of
• For steam engine having a throttle governor, a straight line is obtained when the total weight of steam used per hour is plotted against the indicated horse power. This line is known as
• A fan is being operated in an environment for which information is available. Now if the fan speed is doubled, how will the static pressure vary
• A system having connected load of 100 kW, peak load of 80 kW, base load of 20 kW and average load of 40 kW will have a load factor of