In naturally aspirated engine the pressure inside cylinder at the end of suction stroke is

Related MCQs

• In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become
• In a surface condenser near to the air pump suction the vacuum is 500 mm of mercury with 730 mm of mercury height in a barometer. The pressure near the air pump suction would be
• In a four stroke cycle the minimum temperature inside the engine cylinder occurs
• For the same power and same speed, the flywheel of a two stroke engine as compared to that of a four stroke engine will be
• In all a four stroke four cylinder engine will have how many valves?
• Movement of air inside engine cylinder does not help in
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• In a throttle governed single cylinder steam engine 5 I.H.P. is developed when steam consumption is 50 kg per hour and 2 I.H.P. is developed when the steam consumption is 26 kg per hour. The steam consumptions when the engine develops 4 I.H.P. will be
• The level of oil in engine cylinder should be checked when the engine is
• For same output and same compression ratio four stroke SI engines as compared to two stroke engines have