In a four stage compressor system first and third stage pressures are 1 and 9 kg/cm2 respectively. What will be the fourth stage delivery pressure

Related MCQs

• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• If the pressures at the beginning and end of compression in an Otto cycle engine are 1 kg/cm2 and 8 kg/cm2 respectively the air standard efficiency will be
• A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be
• The temperatures and pressures for boiler are given below. Which of these boilers can be classified as super-critical pressure boiler?
• A back pressure generally operates on pressures in the range
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• The pressure of steam generated in a boiler as recorded by the Bourdon pressure gauge was 2.2 kg/sq-cm. If the barometer reads 774 mm of mercury the absolute pressure of steam would be
• In all a four stroke four cylinder engine will have how many valves?
• For reciprocating air compressor the law of compression desired is isothermal and that may be possible by
• The work done on a compressor will be least when air is taken from