A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be

Related MCQs

• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• In a four stage compressor system first and third stage pressures are 1 and 9 kg/cm2 respectively. What will be the fourth stage delivery pressure
• In multistage compression, perfect intercooling means
• The air standard efficiency of a turbine cycle is 56.5%, which one of the following may be Carnot efficiency between the temperature limits of the cycle?
• Rankine cycle efficiency for fixed steam temperature of any volume upto critical temperature will be maximum for steam pressure of
• In case of a condensing turbine the pressure in the last stage of the turbine is
• The maximum temperature in a gas turbine is of the order of
• Intercooling in multistage compressors is done
• A passout turbine generally operates on low pressure in the range