The gas used for cooling the conductors of large generators is

Related MCQs

• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• Apart from reducing friction and cooling the surfaces, the function of lubricant in I.C. engines is
• In closed cooling system
• In aircraft using gas turbine the cycle used is
• For gas turbines compressors used are
• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be
• Which of the following is false statement? The cause of slow cranking of a gas engine during starting may be
• Compression ratio in case of gas engines waries in the range
• Calorific value of methane gas can be determined by