The average values of modulus of rigidity for aluminium brass, copper and steel in descending order is

Related MCQs

• A steel that has been deoxidized with a strong de-oxidizing agent, such as Silicon or Aluminium in order to eliminate a reaction between C and O2 during solidification, is known as
• The value of Young's modulus of elasticity in ascending order for glass, lead, phosphor bronze, steel and wood is
• The bursting pressure of 12 mm ID, 14 mm OD seamless cartridge brass tubing having ultimate whear stress of 225 Mpa, will be nearly
• In a central heating system, the seamless copper tubing used has an inside diameter of 20 mm and a wall thickness of 0.6 mm. For a maximum pressure of 1750 Kpa, when allowable stress is 225 Mpa, the safety factor will be
• The plastic section modulus is
• Within the elastic range, the bulk modulus of elasticity is defined as the ratio of
• If the stress at elastic limit is Se, then the modulus of resistance is proportional to
• A compressed air cylinder carries approximately 70 kg/cm2 pressure at the time of delivery. The inside diameter is 25 cm. If the steel has a yield point of 2300 kg/sq cm and a safety factor of 2.5 the wall thickness should be
• The minimum thickness of steel members exposed to weather and accessible for paintng is
• The minimum thickness of steel members exposed to weather and accessible for painting is