[Solved] In case of eccentrically loaded struts

McqMate

Q.	In case of eccentrically loaded struts
A.	Hollow section is preferred
B.	Solid section is preferred
C.	Composite section is preferred
D.	Reinforced section is preferred
E.	Any of the above sections mauy be used
Answer» A. Hollow section is preferred

1.3k

0

Do you find this helpful?

10

View all MCQs in

Strength of Materials

Discussion

No comments yet

Related MCQs

In case of eccentrically loaded struts
Eccentrically loaded columns are generally subjected to
Which section is normally preferred for an eccentrically loaded strut?
When the material is loaded with elastic limit , then the stress is ……. to strain.
Within elastic limit in a loaded material, stress is
The axially loaded composite rod shown in Fig. 1.2 has a uniform cross- sectional area of 500 mm 2 . The modulii of elasticity are Est = 200 GPa, Eal = 70 GPa and Ecu = 120 GPa. The change in length of CD is mm.
The axially loaded composite rod shown in Fig. 1.2 has a uniform cross- sectional area of 500 mm 2 . The modulii of elasticity are Est = 200 GPa, Eal = 70 GPa and Ecu = 120 GPa. The change in length of the composite rod is mm.
If the deflection at the free end of a uniformly loaded cantilever beam is 15mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is
When a rectangular beam is loaded transversely, the zero stress is developed on the neutral axis.
The bending moment diagram for a cantilever beam loaded with uniformly distributed load will be a parabolic curve.