During suddenly applied impact loading the stress developed to gradually applied load is

Related MCQs

• The ratio of stress produced by suddenly applied load to that produced by the same load when gradually applied is
• the extension per unit length of the rod due to suddenly applied load as compare to same load gradually applied to same rod is
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• An axial load P is applied on a circular section of diameter D. If the same load is applied on a hollow circular shaft with inner diameter as D/2, the ratio of stress in two cases would be
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A steel rod of cross sectional area equal to 1000 mm2 is 5 m long. If a pull of 100 kN is suddenly applied to it, then the maximum stress intensity will be
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is
• The yield point in fatique loading as compared to the yield point in static loading is