A live load is one that

Related MCQs

• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A uniformly distributed load may be assumed to behave like a point load at the centre of gravity of the load for all sorts of calculations.
• If the working load is one third of the ultimate load, the factor of safety is
• When both ends of a column are fixed, the crippling load is P. If one end of the column is made free, the value of crippling load will be changed to
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is
• Two cantilever beams are of equal length. One carries a uniformly distributed load and other carries same load but concentrated at the free end. The ratio of maximum deflection is
• the extension per unit length of the rod due to suddenly applied load as compare to same load gradually applied to same rod is
• If a prismatic member with area of cross-section A is subjected to a tensile load P, then the maximum shear stress and its inclination with the direction of load respectively are
• A beam ABC rests on simple supports at A and B with BC as an overhang. D is centre of span AB. If in the first case a concentrated load P acts at C while in the second case load P acts at D, then the
• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is