Two cantilever beams are of equal length. One carries a uniformly distributed load and other carries same load but concentrated at the free end. The ratio of maximum deflection is

Related MCQs

• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is
• If the deflection at the free end of a uniformly loaded cantilever beam is 15mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
• A cantilever beam of length / carries a gradually varying load from zero at free end and w per unit length at the fixed end. The maximum deflection oes at
• A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
• Two beams carrying uniformly distributed load have same depth but beams A has width 2nd as compared to width w for beam B. The ratio of elastic strength of beam A compred to that of B will be
• A cantilever beam of length 5 m carries a uniformly distributed load of 100 Newtons/m throughout its length. The maximum shearing force in the beam will be
• The maximum bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length lies at the middle of its length.
• A beam of overall length 1 with equal overhangs on both sides carries a uniformly distributed load over the entire length. To have numerically equal bending moments at centre of the beam and at supports, the distance between the supports should be
• A beam of overall length / rests on two simple supports with equal overhangs on both sides. Two equal loads act at the free ends. If the deflection at the centre of the beam is the same as at either end, then the length of either overhang is