A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C

Related MCQs

• The rate of heat flow from a 50 mm thick wall of material having thermal conductivity of 40 W/m?C for a temperature difference of 10?C will be
• The ratio of heat flow QA/QB from two walls of same thickness having thermal conductivity kA = 2 kB, for the same temperature difference will be
• Out of the following materials which may be expected to have higher value of thermal conductivity?
• Two gases X and Y having the same temperature T, the same pressure P and the same volume V are mixed. If the mxiture has the volume V and temperature T, then the pressure of the mixture must be
• The critical temperature of carbondioside is 31.1?C. If the room temperature is 34.7?C, then carbondioxide at room temperature is
• "What two dissimilar metals are heated at one end cooled at the other c.m.f. is developed proportional to difference of temperatures at two ends". Which of the following name is associated with the above statement?
• Highly polished surfaces of a thermosflask prevent heat by
• Two vessels of volume 5 litres and 3 litres contain air at a pressure of 3 atmospheres and 5 atmospheres respectively. When the two vessels are connected together by a small tube (at constant temperature) the reusltant pressure will be
• When a fluid is passed in steady, flow through a porous plug in a duct under such conditions that heat transfer, kinetic energy change and potential change is negligible, the process is called
• For a closed system, the difference between the heat added to the system and the work done by the system is equal to the change in