Four balls made of lead, glass, brass and iron made of same size, are heated to 100?C. They are simultaneously placed on a sheet of paraffin nearly 5 mm thick. Which ball will drop first?

Related MCQs

• Two balls of same material and finish have their diameters in the ratio of 2 : 1 and both are heated to same temperature and allowed to cool by radiation. Rate of cooling by big ball as compared to smaller one will be in the ratio of
• Three rods one made of glass, one of pure aluminium and one made of wrought iron are heated to 150?C. All the rods are 15 mm in diameter and 300 mm long. The lowest temperature at the free end of the rods will occur in case of
• A metal ball of radius 0.1 m at a uniform temperature of 90°C is left in air at 30°C. The density and the specific heat of the metal are 3000 kg/m3 and 0.4 kJ/kg.K respectively. The heat transfer co-efficient is 50 W/m2.K Neglecting the temperature gradients inside the ball, the time taken (in hours) for the ball to cool to 60°C is
• A cube, sphere & a thin circular plate (all having same mass and made of same material) are all heated to 300°C and allowed to cool in natural air. Which one will cool the slowest?
• The ratio of thermal conductivity of copper to that of brass is nearly
• Four identical copper cubes are painted with different paints. Now if all the cubes are heated to the same temperature and are left in vacuum, which cube will lose heat more rapidly? The colours of the cubes are
• A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case,
• Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because
• A shpere, a cube and a disc all of the same material, quality and volume are heated to 900K and left in air. Which of these will have the lowest rate of cooling
• The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is