A steam pipe is to be insulated by two insulating materials put over each other. For best results

Related MCQs

• A steam pipe is to be insulated by two insulating materials put over each other. For best results
• A 10 cm dia steam pipe, carrying steam at 180°C, is covered with an insulation (conductivity = 0.6 W/m.°C). It losses heat to the surroundings at 30°C. Assume a heat transfer co-efficient of 0.8 W/m2 .°C for heat transfer from surface to the surroundings. Neglect wall resistance of the pipe and film resistance of steam. If the insulation thickness is 2 cms, the rate of heat loss from this insulated pipe will be
• Heat is transferred from an insulated pipe to the surrounding still air mainly by
• Which of the following is the most widely used heat insulating material for pipelines carrying steam?
• Low thermal conductivity of heat insulating materials is due to its
• In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation will
• The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient varies with the pipe diameter (D) as
• The critical radius of insulation for cylindrical pipe is (where, hi = heat transfer coefficient at inside of the pipe)
• The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins.
• Loss of heat from untagged steam pipe to the ambient air is by