McqMate

Q. |
## An engine receives 15152 J/s of heat & produces 5 KW of power. The efficiency of the engine is |

A. | 25% |

B. | 27.5% |

C. | 30% |

D. | 33% |

Answer» A. 25% |

1.3k

0

Do you find this helpful?

13

View all MCQs in

Engineering ThermodynamicsNo comments yet

- a heat engine receives heat at the rate of 1500 kJ/min.& gives an output of 8.2 kW. Its thermal efficiency is equal to
- A steam power plant working on Rankine cycle produces steam in the boiler at a rate of 100 kg/s with enthalpy of 3280 kJ/kg from water whose total heat content is 420 kJ/kg. The plant has Rankine efficiency of 24.65 while pump requires 5 kJ/kg of work. The turbine generates power of
- A heat engine is supplied with 250 kJ/s of heat at a constant fixed temperature of 227°C. The heat is rejected at 27°C. The cycle is reversible, if the amount of heat rejected is
- A simple Rankine cycle produces 40 MW of power, 50 MW of process heat and rejects 60 MW of heat to the surroundings. What is the utilization factor of this co generation cycle neglecting the pump work?
- A TER which transfers heat to system is called and one which receives heat is called
- In a cyclic heat engine operating between a source temperature of 600°C & a sink temperature of 20°C, the least rate of heat rejection per kW net output of the engine is
- A heat engine using lake water at 12° C as source & the surrounding atmosphere at 2°C as sink executes 1080 cycles per min. If the amount of heat drawn per cycle is 57J, then the output of the engine will be
- One reversible heat engine operates between 1600 K & T₂ K & another reversible heat engine operates between T₂ K & 400 K. If both the engines have the temperature T₂ must be equal to
- The efficiency of all reversible heat engines operating between the same heat reservoirs is
- An inventor claims that a new heat cycle will develop 0.4 kW for a heat addition of 32.5 kJ/mm. The temperature of heat source is 1990 K & that of sink is 850K. Is his claim true?