Maximum amount of work that can be converted into heat in any process

Related MCQs

• A heat engine is supplied with 250 kJ/s of heat at a constant fixed temperature of 227°C. The heat is rejected at 27°C. The cycle is reversible, if the amount of heat rejected is
• During a polytropic expansion 25% of heat is converted into work while temperature of gas rises by 30 K, the specific heat of gas at constant volume is
• During a constant pressure expansion of a gas 33.3 % heat is converted into work while the temperature rises by 20K. The specific heat of gas at constant pressure is
• Correlate the following statements i) the volume of water into which steam is condensed in condenser is very much smaller than the volume of steam before condensation ii) the net work of a Rankine cycle is heat supplied in boiler - heat rejected to condenser - pump work
• In an constant pressure heating certain fraction of heat supplied is converted into work. If ?=1.4 this fraction is
• A simple Rankine cycle produces 40 MW of power, 50 MW of process heat and rejects 60 MW of heat to the surroundings. What is the utilization factor of this co generation cycle neglecting the pump work?
• An inventor claims that a new heat cycle will develop 0.4 kW for a heat addition of 32.5 kJ/mm. The temperature of heat source is 1990 K & that of sink is 850K. Is his claim true?
• A heat engine using lake water at 12° C as source & the surrounding atmosphere at 2°C as sink executes 1080 cycles per min. If the amount of heat drawn per cycle is 57J, then the output of the engine will be
• In a reheat Rankine cycle steam with enthalpy of 3300 kJ/kg is expanded in h.p turbine to a state where enthalpy is 2650 kJ/kg. The steam is further expnaded from a state where enthalpy is 2950 kJ/kg to enthalpy of 2525 kJ/kg & latent heat of 2201 kJ.kg. The work of the cycle & amount of reheat respectively are
• The unavailable energy is the product of the lowest temperature of heat rejection and the change of entropy of system during the process of supplying heat.