For a n-p-n transistor, the collector current changed from 0.2mA to 0.22mA resulting a change of base emitter voltage from 0.8v to 0.8005V. What is the value of Stability factor?

Related MCQs

• Increase in collector emitter voltage from 5V to 8V causes increase in collector current from 5mA to 5.3mA. Determine the dynamic output resistance.
• The base current for a BJT remains constant at 5mA, the collector current changes from 0.2mA to 0.3 mA and beta was changed from 100 to 110, then calculate the value of S.
• Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
• In CB configuration, the value of α=0.98A. A voltage drop of 4.9V is obtained across the resistor of 5KΩ when connected in collector circuit. Find the base current.
• For a pnp transistor in the active region the value of Vce (potential difference between the collector and the base) is
• Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
• Which of the following is true for the cut- off region in an npn transistor?
• Which of the following is true for a typical active region of an npn transistor?
• Which of the following is true for the active region of an npn transistor?
• Which of the following is true for a npn transistor in the saturation region?