A               bearing supports the load acting along the axis of the shaft.

Related MCQs

• A radial bearing supports the load that acts along the axis of the shaft.
• If for a curved beam of trapezoidal cross section, radius of neutral axis is 89.1816mm and radius of centroidal axis is 100mm, then find the bending stress at inner fibre whose radius is 50mm. Area of cross section of beam is 7200mm² and the beam is loaded with 100kN of load.
• If a clearance fit is present between shaft and hole, what is the tolerance on shaft or hole for a complete interchangeable approach?
• The strength of hollow shaft is more than the strength of solid shaft of same weight.
• If allowable shear stress in the shaft is 70N/mm² and torsional and bending moments are M=1185000N-mm and m=330000N-mm, find the diameter of the shaft.
• Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm².
• The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight.
• Solid shaft is costlier than hollow shaft of same weight.
• 1816mm and radius of centroidal axis is 100mm, then find the bending stress at inner fibre whose radius is 50mm. Area of cross section of beam is 7200mm² and the beam is loaded with 100kN of load.
• Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing.