For a multicylinder engine, the coefficient of fluctuation of speed would vary with

Related MCQs

• For a 4 cylinder engine, if the minimum speed of the engine is half the maximum speed, then coefficient of fluctuation is
• In the turning moment diagram of a multicylinder engine, the work done during exhaust stroke is by              
• For the given data of an Internal combustion engine : Mass of parts = 180 kg bore = 175 mm, length of stroke = 200 mm, engine speed = 500 r.p.m., length of connecting rod = 400 mm and crank angle = 60° from T.D.C, find the inertia force.
• 4 strokes engine have a lower thermal efficiency than 2 stroke engine.
• The flywheel of an engine has a mass of 200 kg and radius of gyration equal to 1 m. The average torque on the flywheel is 1200 Nm. Find the angular acceleration of flywheel and the angular speed after 10 seconds starting from rest.
• 5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• 5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• 5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
• 5 and the mean speed is 20 rpm, find the maximum speed.
• 5 and the mean speed is 20 rpm, find the minimum speed.