When a periodic disturbing force is applied to a machine, the force is transmitted to the foundation by the means of spring.

Related MCQs

• If isolation factor is negative, then what is the phase difference between transmitted and disturbing force?
• Power is transmitted by an electric motor to a machine by using a belt drive. The tensions on the tight and slack side of the belt are 2200 N and 1000 N respectively and diameter of the pulley is 600 mm. If speed of the motor is 1500 r.p.m, find the power transmitted.
• Which of the following is a type of transmitted force to the foundation?
• A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (fn), respectively, are
• A machine punching 38 mm holes in 32 mm thick plate requires 7 N-m of energy per sq. mm of sheared area, find the maximum shear force required.
• The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (gmoon = gearth/6) is
• A Watt’s governor is a spring loaded governor.
• Which of the following systems produce a vibration in the foundation?
• Inertia force and the reversed effective force are the same.
• A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be