A circular cavity resonator has a wave number of 151, radius of 2.74 cm, and surface resistance of 0.0184Ω. If the cavity is filled with a dielectric of 2.01, then unloaded Q due to conductor loss is:

Related MCQs

• Given that the wave number of a circular cavity resonator is 151 (TE011 mode), and the length of the cavity is twice the radius of the cavity, the radius of the circular cavity operating at 5GHz frequency is:
• If unloaded Q due to conductor loss and unloaded Q due to dielectric loss is 29390 and 2500 respectively, then the total unloaded Q of the circular cavity is:
• A circular cavity resonator is filled with a dielectric of 2.08 and is operating at 5GHz of frequency. Then the wave number is:
• A cylindrical cavity resonator can be constructed using a circular waveguide.
• The mode of the circular cavity resonator used in frequency meters is:
• The dominant mode in the cylindrical cavity resonator is TE101 mode.
• The propagation constant of TEmn mode of propagation for a cylindrical cavity resonator is:
• A water-heater is covered up with insulation boards over a total surface area of 3 m2. The inside board surface is at 75°C and the outside surface is at 20°C and the board material has a conductivity of 0.08 W/m K. How thick a board should it be to limit the heat transfer loss to 200 W ?
• A GaAs injection laser with an optical cavity has refractive index of 3.6. Calculate the reflectivity for normal incidence of the plane wave on the GaAs-air interface.
• A composite wall is made of two layers of thickness δ1 and δ2 having thermal conductivities k and 2k and equal surface area normal to the direction of heat flow. The outer surface of composite wall are at 100 degree Celsius and 200 degree Celsius. The minimum surface temperature at the junction is 150 degree Celsius. What will be the ratio of wall thickness?