An instruction to provide small delay in program

Related MCQs

• Intel 8080 microprocessor has an instruction set of 91 instruction. The opcode to implement this instruction set should be at least
• Characteristic of RISC (Reduced Instruction Set Computer) instruction set is
• Two processors A and B have clock frequencies of 700 Mhz and 900 Mhz respectively. Suppose A can execute an instruction with an average of 3 steps and B can execute with an average of 5 steps. For the execution of the same instruction which processor is faster ?
• A processor performing fetch or decoding of different instruction during the execution of another instruction is called ______ .
• Here a single program is executed by all tasks simultaneously. At any moment in time, tasks can be executing the same or different instructions within the same program. These programs usually have the necessary logic programmed into them to allow different tasks to branch or conditionally execute only those parts of the program they are designed to execute.
• These computer uses the stored-program concept. Memory is used to store both program and data instructions and central processing unit (CPU) gets instructions and/ or data from memory. CPU, decodes the instructions and then sequentially performs them.
• When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the
• Interrupts which are initiated by an instruction are
• Instruction pipelining has minimum stages
• Which one of the following is a characteristic of CISC (Complex Instruction Set Computer)