A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.

Related MCQs

• 0.4 dB/km, 1.4μm, 6μm, 550MHz. Find threshold optical power for stimulated Raman scattering.
• Stimulated Brillouin scattering is mainly a
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• A single mode fiber has refractive indices n1=1.50, n2= 2.23, core diameter of 8μm, wavelength=1.5μm cutoff wavelength= 1.214μm. Find the radius of curvature?
• ________ couplers combine the different wavelength optical signal onto the fiber or separate the different wavelength optical signal output from the fiber.
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?
• Determine the 3 dB electrical bandwidth at 3 dB optical bandwidth Bopt of 56.2 MHz.
• The 3 dB electrical bandwidth B is 42 MHz. Determine 3dB optical bandwidth Bopt:
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• Raman and Brillouin scattering are usually observed at