Practical pulse broadening value for graded index fiber lies in the range of

Related MCQs

• Estimate RMS pulse broadening per km due to intermodal dispersion for multimode step index fiber where length of fiber is 4 km and pulse broadening per km is 80.6 ns.
• What is pulse dispersion per unit length if for a graded index fiber, 0.1μs pulse broadening is seen over a distance of 13 km?
• . A multimode fiber has RMS pulse broadening per km of 12ns/km and 28ns/km due to material dispersion and intermodal dispersion resp. Find the total RMS pulse broadening.
• A multimode step-index fiber has a core refractive index of 1.5 and relative refractive index difference of 1%. The length of the optical link is 6 km. Estimate the RMS pulse broadening due to intermodal dispersion on the link.
• A multimode graded index fiber exhibits a total pulse broadening of 0.15μsover a distance of 16 km. Estimate the maximum possible bandwidth, assuming no intersymbol interference.
• A multimode step index fiber has source of RMS spectral width of 60nm and dispersion parameter for fiber is 150psnm-1km-1. Estimate rms pulse broadening due to material dispersion.
• A graded index fiber has a parabolic refractive index profile (α=2) and core diameter of 42μm. Estimate an insertion loss due to a 2 μm lateral misalignment when there is index matching and assuming there is uniform illumination of all guided modes only.
• A 4 km optical link consists of multimode step index fiber with core refractive index of 1.3 and a relative refractive index difference of 1%. Find the delay difference between the slowest and fastest modes at the fiber output.
• Two joined graded index fibers that are perfectly aligned have refractive indices αR=1.93for receiving fiber αE= 2.15 for emitting fiber. Calculate the coupling loss
• A graded-index fiber has a core with parabolic refractive index profile of diameter of 30μm, NA=0.2, λ=1μm. Estimate the normalised frequency.