Which materials are unsuitable for the fabrication of graded index fiber?

Related MCQs

• A graded index fiber has a parabolic refractive index profile (α=2) and core diameter of 42μm. Estimate an insertion loss due to a 2 μm lateral misalignment when there is index matching and assuming there is uniform illumination of all guided modes only.
• A 4 km optical link consists of multimode step index fiber with core refractive index of 1.3 and a relative refractive index difference of 1%. Find the delay difference between the slowest and fastest modes at the fiber output.
• Two joined graded index fibers that are perfectly aligned have refractive indices αR=1.93for receiving fiber αE= 2.15 for emitting fiber. Calculate the coupling loss
• A graded-index fiber has a core with parabolic refractive index profile of diameter of 30μm, NA=0.2, λ=1μm. Estimate the normalised frequency.
• A graded-index fiber has a core with parabolic refractive index profile of diameter of 30μm, NA=0.2, λ=1μm. Estimate the normalised frequency.
• The index profile of a core of multimode graded index fiber is given by-
• ___________ exhibits a parabolic refractive index profile with a maximum at the axis similar to graded index fiber.
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.
• A multimode step-index fiber has a core refractive index of 1.5 and relative refractive index difference of 1%. The length of the optical link is 6 km. Estimate the RMS pulse broadening due to intermodal dispersion on the link.