A semiconductor laser crystal of length 5 cm, refractive index 1.8 is used as an optical source. Determine the frequency separation of the modes.

Related MCQs

• A 4 km optical link consists of multimode step index fiber with core refractive index of 1.3 and a relative refractive index difference of 1%. Find the delay difference between the slowest and fastest modes at the fiber output.
• A ruby laser has a crystal of length 3 cm with a refractive index of 1.60, wavelength 0.43 μm. Determine the number of longitudinal modes.
• A GaAs optical source having a refractive index of 3.2 is coupled to a silica fiber having a refractive index of 1.42. Determine Fresnel reflection at interface in terms of percentage.
• A multimode step-index fiber has a core refractive index of 1.5 and relative refractive index difference of 1%. The length of the optical link is 6 km. Estimate the RMS pulse broadening due to intermodal dispersion on the link.
• A graded index fiber has a parabolic refractive index profile (α=2) and core diameter of 42μm. Estimate an insertion loss due to a 2 μm lateral misalignment when there is index matching and assuming there is uniform illumination of all guided modes only.
• An injection laser has active cavity losses of 25 cm-1and the reflectivity of each laser facet is 30%. Determine the laser gain coefficient for the cavity it has a length of 500μm.
• Losses caused by factors such as core-cladding diameter, numerical aperture, relative refractive index differences, different refractive index profiles, fiber faults are known as
• A GaAs injection laser with an optical cavity has refractive index of 3.6. Calculate the reflectivity for normal incidence of the plane wave on the GaAs-air interface.
• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.