McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Master of Computer Applications (MCA) .
Chapters
| 51. |
The representations for surface modeling include. |
| A. | Polygon mesh |
| B. | Parametric surfaces |
| C. | Quadric surfaces |
| D. | All of the above |
| Answer» D. All of the above | |
| 52. |
Quadric surfaces are defined by equation |
| A. | f(x,y,z) = 0 |
| B. | f(x) = 0 |
| C. | f(y) = 0 |
| D. | f(z) = 0 |
| Answer» A. f(x,y,z) = 0 | |
| 53. |
In explicit representation each polygon is represented by list of |
| A. | Vertex coordinates |
| B. | Edge coordinates |
| C. | Vertex and Edge both |
| D. | None of the above |
| Answer» A. Vertex coordinates | |
| 54. |
In pointers to vertex list |
| A. | Each vertex is stored once |
| B. | Each vertex is stored twice |
| C. | Vertex is not stored |
| D. | Edges are stored |
| Answer» A. Each vertex is stored once | |
| 55. |
In case of explict functions the functions are equal to |
| A. | y = f(x) |
| B. | z = g(x) |
| C. | None of the above |
| D. | Both a & b |
| Answer» D. Both a & b | |
| 56. |
The value of x,y,z in case of parametric representation of curves is |
| A. | x(t) |
| B. | y(t) |
| C. | z(t) |
| D. | All of the above |
| Answer» D. All of the above | |
| 57. |
The parameter t ranges from |
| A. | 1 to 0 |
| B. | 0 to 1 |
| C. | 0 to ∞ |
| D. | ∞ to 0 |
| Answer» B. 0 to 1 | |
| 58. |
If two curve segments join together the curve has |
| A. | G 1 continuity |
| B. | G 0 continuity |
| C. | G 2 continuity |
| D. | G 3 continuity |
| Answer» B. G 0 continuity | |
| 59. |
If tangent vectors of two cubic curve segments are equal the curve has |
| A. | C 1 continuity |
| B. | C 0 continuity |
| C. | C 2 continuity |
| D. | None of the above |
| Answer» A. C 1 continuity | |
| 60. |
A joystick is a |
| A. | Graphics input device |
| B. | Graphics output device |
| C. | Both a & b |
| D. | None of these |
| Answer» A. Graphics input device | |
| 61. |
A Bezier curve is a polynomial of degree ___________the no of control points used |
| A. | One more than |
| B. | One less than |
| C. | Two less than |
| D. | None of these |
| Answer» B. One less than | |
| 62. |
A three dimensional object can also be represented using_______ |
| A. | Method |
| B. | Equation |
| C. | Point |
| D. | None of these |
| Answer» B. Equation | |
| 63. |
A three dimensional graphics has |
| A. | Two axes |
| B. | Three axes |
| C. | Both a & b |
| D. | None of these |
| Answer» B. Three axes | |
| 64. |
An_______ can be considered as an extension of spherical surface |
| A. | Bezier |
| B. | Ellipsoid |
| C. | Shearing |
| D. | None of these |
| Answer» B. Ellipsoid | |
| 65. |
Sp line curve can be either |
| A. | Bezier sp line |
| B. | B sp line |
| C. | Both a & b |
| D. | None of these |
| Answer» C. Both a & b | |
| 66. |
Bezier sp line always passes through |
| A. | First and second control point |
| B. | Does not pass from First and second control point |
| C. | Both a & b |
| D. | None of these |
| Answer» C. Both a & b | |
| 67. |
The Bezier curve obtained from the four control points is called a |
| A. | Square Bezier curve |
| B. | Cubic Bezier curve |
| C. | Hectare Bezier curve |
| D. | Rectangle Bezier curve |
| Answer» B. Cubic Bezier curve | |
| 68. |
The shape of a Bezier curve primarily depends upon the |
| A. | Position of control points |
| B. | Distance of control points |
| C. | Position of control panel |
| D. | None of these |
| Answer» A. Position of control points | |
| 69. |
The no of control points in a Bezier curve ensures the |
| A. | Jaggies of curve |
| B. | Smoothness of curve |
| C. | Straightness of curve |
| D. | None of these |
| Answer» B. Smoothness of curve | |
| 70. |
More the control points of a Bezier curve,________ quality of the curve |
| A. | Higher |
| B. | Lower |
| C. | Bad |
| D. | None of these |
| Answer» A. Higher | |
| 71. |
______is one of the function that is used to specify a single plane surface |
| A. | Meta-ball model |
| B. | Fill area |
| C. | Reflection |
| D. | None of these |
| Answer» B. Fill area | |
| 72. |
Meta-ball is used to describe |
| A. | Simplest object |
| B. | Complex object |
| C. | Composite object |
| D. | None of these |
| Answer» C. Composite object | |
| 73. |
Super quadrics is a class of object that contain |
| A. | Data |
| B. | Codes |
| C. | Both a & b |
| D. | None of these |
| Answer» C. Both a & b | |
| 74. |
When two molecules move apart, which effect on molecular shapes |
| A. | Stretching |
| B. | Snapping |
| C. | Contracting |
| D. | All of these |
| Answer» D. All of these | |
| 75. |
An object's _______ determine its orientation relative to the light sources. For each vertex, OpenGL uses the assigned normal to determine how much light that particular vertex receives from each light source. |
| A. | Unit |
| B. | Normal |
| C. | Double |
| D. | None |
| Answer» B. Normal | |
| 76. |
Bezier curve is tangent to the lines connecting _____________. |
| A. | First two points |
| B. | Last two points |
| C. | Fist two points and last two point |
| D. | None of the given |
| Answer» C. Fist two points and last two point | |
| 77. |
A parametric curve is one whose defining equations are given in terms of a -------------, common, independent variable called the parametric variable. |
| A. | Triple |
| B. | Double |
| C. | Single |
| D. | None of the given |
| Answer» C. Single | |
| 78. |
To ensure a smooth transition from one section of a piecewise __________ to the next, we can impose various continuity conditions at the connection points |
| A. | non parametric curve |
| B. | parametric curve |
| C. | polygon vector |
| D. | None of these |
| Answer» D. None of these | |
| 79. |
How many data elements for each region in quad-tree data structure |
| A. | 2 |
| B. | 4 |
| C. | 8 |
| D. | 6 |
| Answer» C. 8 | |
| 80. |
How many data elements for each region in octree data structure |
| A. | 2 |
| B. | 4 |
| C. | 6 |
| D. | 8 |
| Answer» D. 8 | |
| 81. |
............... refer to the shapes created by union, intersection and difference of given shapes |
| A. | Wire frame model |
| B. | Composite transformation |
| C. | Constructive solid geometry methods |
| D. | None |
| Answer» C. Constructive solid geometry methods | |
| 82. |
The operation that is used for repositioning the object is called |
| A. | Rubber band method |
| B. | Gravity method |
| C. | Dragging |
| D. | None |
| Answer» C. Dragging | |
| 83. |
Which method are used to construct and position the straight lines, arcs and circles etc. |
| A. | Rubber band method |
| B. | Gravity method |
| C. | Dragging |
| D. | None of these |
| Answer» C. Dragging | |
| 84. |
Identify the methods for Constructive Solid Geometry operations |
| A. | Ray casting |
| B. | Ray tracing |
| C. | Beam penetration |
| D. | Ray sorting |
| Answer» A. Ray casting | |
| 85. |
........................... solid representation takes advantage of spatial coherence to reduce the storage representations. |
| A. | Sweep representation |
| B. | Octree |
| C. | Polygon surfaces |
| D. | CSG |
| Answer» B. Octree | |
| 86. |
................... is a data element to store the pixels within an octant having same color |
| A. | Voxel |
| B. | Void |
| C. | Tex |
| D. | Flag |
| Answer» A. Voxel | |
| 87. |
Empty regions of the space are represented by type.................... |
| A. | int |
| B. | void |
| C. | null |
| D. | empty |
| Answer» B. void | |
| 88. |
In a clipping algorithm of Cohen & Sutherland using region codes, a line is already clipped if the ? |
| A. | codes of the end point are same |
| B. | logical AND of the end point code is not 0000 |
| C. | logical OR of the end points code is 0000 |
| D. | A and B |
| Answer» D. A and B | |
| 89. |
The subcategories of orthographic projection are ? |
| A. | cavalier, cabinet, isometric |
| B. | cavalier, cabinet |
| C. | isometric, dimetric, trimetric |
| D. | isometric, cavalier, trimetric |
| Answer» C. isometric, dimetric, trimetric | |
| 90. |
Which are used to achieve the predetermined orientations and alignments of the objects |
| A. | Constraints |
| B. | Grid |
| C. | Gravity field |
| D. | None of these |
| Answer» A. Constraints | |
| 91. |
Which of the following curve is an Sp-line approximation method |
| A. | Bezier |
| B. | Ellipsoid |
| C. | Shearing |
| D. | None of these |
| Answer» A. Bezier | |
| 92. |
We translate a two-dimensional point by adding |
| A. | Translation distances |
| B. | Translation difference |
| C. | X and Y |
| D. | Only a |
| Answer» D. Only a | |
| 93. |
B-splines can be used for which of the following |
| A. | Curve-fitting and numerical differentiation of experimental data. |
| B. | approximation |
| C. | numerical transformation |
| D. | none of the above |
| Answer» A. Curve-fitting and numerical differentiation of experimental data. | |
| 94. |
A B-spline of order n is a piecewise polynomial function of degree ________ in a variable x |
| A. | (a)less than n |
| B. | greater than n |
| C. | (c)equal to n |
| D. | (d)none of these |
| Answer» A. (a)less than n | |
| 95. |
if a knot vector of m + 1 knots and n + 1 control points are given, the degree of the Bspline curve is p= |
| A. | m+n - 1 |
| B. | m-n-1 |
| C. | m+n+1 |
| D. | n-m+1 |
| Answer» B. m-n-1 | |
| 96. |
Second order parametric continuity(C2 continuity) means that both ____and____ parametric derivatives of the two curves are same at the intersection |
| A. | second and third |
| B. | first and second |
| C. | second and third |
| D. | third and fourth |
| Answer» B. first and second | |
| 97. |
How many basic method of projection |
| A. | Four |
| B. | Two |
| C. | More than three |
| D. | One |
| Answer» B. Two | |
| 98. |
Lines of projection coverage at a single point called |
| A. | Centre of attraction |
| B. | Centre of projection |
| C. | Line of projection |
| D. | None |
| Answer» B. Centre of projection | |
| 99. |
Select the perspective anomalies from the following: |
| A. | Perspective foreshortening |
| B. | Perspective increasing |
| C. | Centre of projection |
| D. | Vanishing point |
| Answer» A. Perspective foreshortening | |
| 100. |
Difference between parallel and perspective projection lies in the |
| A. | Centre of attraction |
| B. | Centre of projection |
| C. | Line of control |
| D. | None |
| Answer» B. Centre of projection | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.