The Eb/V ratio of a dc motor is an indication of its

Related MCQs

• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• If the back emf in a dc motor varnishes suddenly, then the motor:
• A thick wire is used in dc series motor field winding than that in dc shunt motor:
• A DC shunt motor is driving a constant torque load. On inserting an additional resistance in the armature circuit, the speed of the motor will:
• A flywheel is employed with a dc compound motor to reduce the peak demand, the compound motor should be:
• The shaft torque in a DC motor is less than total armature torque because of ____in the motor
• ____ motor is a variable speed motor.