For 20% increase in current, the motor that will give the greastest increase in torque is ___ motor

Related MCQs

• The shaft torque in a DC motor is less than total armature torque because of ____in the motor
• A DC motor develops torque of the 100Nm at 400 rpm, at 300 rpm a motor will develop torque of___.
• The armature torque of a DC motor running of 800rpm is 99.3Nm and shaft torque is 93.3Nm. The iron and friction losses are__.
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• A shunt motor runs at 500rpm on a 200V circuit. Its armature resistance is 0.5Ω and the current taken is 30A in addition to field current. What resistance must be placed in series with armature circuit to reduce to speed to 300 rpm; the current in armature remains same.
• If the applied voltage of dc motor is reduced to half with load torque doubled the armature current will be____
• A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the armture torque?
• A 220V DC shunt motor takes a total current of 80A and runs at 800 rpm. Resistnace of a shunt field is 50Ω and that of armature 0.1Ω. The iron and friction losses amount to 1600W. What is the lost torque?
• A 220V series motor takes a current of 35A and runs at 500rpm. Armature resistance of 0.25Ω and series field resistance 0.3Ω. If iron and frictional losses amount of 600W, what is the armature torque?