When a induction motor is switched on a rotor frequency is

Related MCQs

• A wound rotor induction motor can be distinguished from a squirrel cage induction motor by
• Two of the supply terminals to a 3-phase induction motor get interchanged during reconnection after normal maintenance. When switched on to supply, the motor will
• The speed of rotating field due to rotor currents relative to rotor surface in an induction motor is
• The rotor standstill resistance and reactance of an induction motor are 0.5Ω and 2.5Ω hence the rotor impedance at 5% slip is____.
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• When an induction motor is running at full load, rotor reactance is ------rotor resistance
• A 3-phase ,400 V, 4-pole induction motor is fed from a 3-phase, 400V, 50 Hz supply and runs at 1440 rpm. The frequency of rotor emf is
• A 4 pole, 50Hz induction motor runs at a speed of 1440rpm. The frequency of the rotor induced emf is _____.
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is