When an induction motor is running at full load, rotor reactance is ------rotor resistance

Related MCQs

• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• The rotor standstill resistance and reactance of an induction motor are 0.5Ω and 2.5Ω hence the rotor impedance at 5% slip is____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are