A 6pole ,3 phase 50Hz I.M is running with s=3%,runs with

Related MCQs

• A 6pole ,3 phase 50Hz I.M is running with 970 rpm. The slip of I.M is
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
• A 6pole, 3-ph induction motor is runs at a speed of 960rpm & the shaft torque is 135.7Nm. Calculate the rotor cu loss if the friction and windage losses amount to 150W. The suppy freq is 50Hz.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the maximum torque developed is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• A 8pole ,3 phase 50Hz I.M is running with 731.25 rpm. The slip of I.M is
• A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.
• A 50Hz 20 poles 3 phase I.M. has a full load slip 1.33%. Its rotor impedance per phase on standstill is 0.02+j0.3ohms. Then the ratio of starting torque to the maximum torque is____.
• A 25kW, 3 phase I.M. is running with 6% slip. Its rotor resistance per phase is____ if frictional losses are 850W and rotor current per phase is 65A.