[Solved] A 50Hz 20 poles 3 phase I.M. has a full load slip 1.33%. Its rotor impedance per phase on standstill is 0.02+j0.3ohms. Then the ratio of starting torque to the maximum torque is___

Q.	A 50Hz 20 poles 3 phase I.M. has a full load slip 1.33%. Its rotor impedance per phase on standstill is 0.02+j0.3ohms. Then the ratio of starting torque to the maximum torque is____.
A.	0.384
B.	0.527
C.	0.132
D.	0.854
Answer» C. 0.132

1.2k

Do you find this helpful?

View all MCQs in

Electrical and Electronics Engineering

Discussion

No comments yet

Related MCQs

A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.
A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.
A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The external resistance required in the rotor per phase to get maximum torque at start is ___.
A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the maximum torque developed is ___ Nm.
A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
A 3 phase I.M. has rotor impedance on standstill as 0.8+j3.8Ω. Then the maximum torque will occur at slip of ____%

A 50Hz 20 poles 3 phase I.M. has a full load slip 1.33%. Its rotor impedance per phase on standstill is 0.02+j0.3ohms. Then the ratio of starting torque to the maximum torque is____.

Discussion

Related MCQs