When load is connected to three phase induction motor is increased, then its slip

Related MCQs

• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• When load is connected to three phase induction motor is increased, then its rotor induced emf
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• A 3 phase induction motor connected from a 3 pjhase, 50Hz AC supply runs at 720rpm and has slip 4%. The number of poles in motor are _____.
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A 3-phase, 4-pole induction motor has a no-load slip of 2% when connnected to a 25 Hz source, the no-load speed in rpm is
• A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• A 50Hz, 8 pole, 3 phase I.M. has a full load slip of 4%. Its rotor impedance per phase on standstill is 0.01+j0.005 ohms. Then the speed at maximum torque is ____.