[Solved] Separation of combustion curve from motoring curve in SI engine takes place

McqMate

Q.	Separation of combustion curve from motoring curve in SI engine takes place
A.	when crank angle is about 10 deg. before tdc
B.	when crank angle is about 10 deg. after tdc
C.	when crank angle is about 10 deg. before bdc
D.	when crank angle is about 10 deg. after bdc
Answer» A. when crank angle is about 10 deg. before tdc

1.1k

0

Do you find this helpful?

1

View all MCQs in

Applied Thermodynamics (AT)

Discussion

No comments yet

Related MCQs

On P.Ѳ. Diagram, separation of combustion curve from motoring curve in SI engine takes place…
Pressure during motoring in SI engine compared to CI engine is….
Pressure during motoring in SI engine compared to CI engine is
Maximum pressure obtained in normal SI engine during motoring is about…..
Maximum pressure pobtained in SI engine duering motoring is about
A motoring curve is plotted when
Which phase of combustion takes place during expansion stroke…..
Which phase of combustion takes place during expansion stroke
Favourable conditions for combustion are: 1. The presence of combustible mixture 2. Initiation by any means like spark plug is not required 3. Stabilization and propagation of flame in the combustion chamber. Out of these following is correct
If flame travel from point of ignition upto end of combustion chamber without change in speed, the combustion is called