For a c chart, the LCL comes out to be -.7. The value of LCL that should be used is:

Related MCQs

• If the value of D4 = 2.547, D3=0, then what is the UCL and LCL for the R chart?
• An acceptance control chart has limits that are based on the specification limits for the product rather than limits which differentiate between random and assignable causes. Under which if the following circumstance should a QC manager consider using an acceptance control chart?
• The g chart is the control chart for:
• You are sampling items from a batch and plotting the results on a control chart. How will an increase in the number of items sample affect the value of the standard deviation used to set the control limit?
• For a point in the control chart to be out of control, it must lie
• For the above table, what is the value corresponding to the central line for the x bar chart?
• In case someone is interested in process standard deviation, he should construct the ______________ chart.
• A fan blade is specified by length and thickness. While sampling, it was found that for one particular blade, the length was non-conforming while the thickness was as per specifications. Should the blade be considered non-conforming for construction of a p chart?
• If we want to detect small process shifts using x bar chart, we should use a sample size of:
• In case someone is interested in process standard deviation, he should construct the ______________ chart.