The velocity at which the laminar flow stops, is known as

Related MCQs

• The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow.)
• The velocity at which the flow changes from laminar flow to turbulent flow is called
• The ratio of average velocity to maximum velocity for steady laminar flow in circular pipes is
• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• Flow at constant rate through a tapering pipe is i) steady flow ii) uniform flow iii) unsteady flow iv) non-uniform flow The correct answer is
• Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
• In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• The velocity distribution for laminar flow through a circular tube
• A fluid of kinematic viscosity 0.4 cm2/sec flows through a 8 cm diameter pipe. The maximum velocity for laminar flow will be