A fluid of kinematic viscosity 0.4 cm2/sec flows through a 8 cm diameter pipe. The maximum velocity for laminar flow will be

Related MCQs

• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• If the dynamic viscosity of a fluid is 0.5 poise and specific gravity is 0.5, then the kinematic viscosity of that fluid in stokes is
• According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe)
• The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of pipe, f = Darcy’s coefficient of friction for pipe, and l = Length of pipe)
• A liquid flows with the same velocity through two pipes 1 and 2 having the same diameter. If the length of the second pipe be twice that of the first pipe, what should be the ratio of the head loss in the two pipes?
• The discharge of a liquid of kinematic viscosity 4 cm2/sec through a 8 cm dia-meter pipe is 3200n cm7sec. The type of flow expected is
• The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow.)
• Flow at constant rate through a tapering pipe is i) steady flow ii) uniform flow iii) unsteady flow iv) non-uniform flow The correct answer is
• If a sphere of diameter 1 cm falls in castor oil of kinematic viscosity 10 stokes, with a terminal velocity of 1.5 cm/sec, the coefficient of drag on the sphere is
• The distance y from pipe boundary, at which the point velocity is equal to average velocity for turbulent flow, is (where R is radius of pipe.)