The velocity component after striking the surface will be_              

Related MCQs

• Efficiency of the jet of the water having velocity V & Striking a series if vertical plates moving with a velocity u is given by,
• Efficiency off the jet of the water having velocity V & Striking a series of vertical plates moving with a velocity u, is maximum when
• A jet after striking a smooth plate comes out with a velocity.
• The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow.)
• means the angle made by absolute velocity with the tangent on the wheel is 90 degrees and the component of whirl velocity is zero.
• Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
• The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
• In a stationery vertical plate, the jet after striking the plate will move