is obtained by dividing total rate of flow through the turbine by rate of flow through single jet.

Related MCQs

• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• The volumetric efficiency of a Francis turbine is given to be 90%. If the volume flow rate through the turbine is 25 m3/s. What is the flow rate of water over the runner blades (in m3/s)?
• A student reports the volumetric efficiency of a Kaplan turbine to be 95%. If he measures the volume flow rate through the turbine is 40 m3/s. What is the flow rate of water over the runner blades (in m3/s)?
• Find the diameter of jet D, if jet ratio m and diameter of jet d are given as 10 and 125mm.
• The velocity of flow through a Kaplan turbine is 10 m/s. The outer diameter of the runner is 4 m and the hub diameter is 2 m. Find the volume flow rate of the turbine in m3/s?
• Flow at constant rate through a tapering pipe is i) steady flow ii) uniform flow iii) unsteady flow iv) non-uniform flow The correct answer is
• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• The flow rate of the water flow in a Francis turbine is increased by 50% keeping all the other parameters same. The work done by the turbine changes by?
• The volume flow rate into a Francis turbine is Q m3/s. 0.25Q m3/s volume of water do not flow over the runner blades. What is the mechanical efficiency of the turbine (in %)?
• The volume flow rate into a Kaplan turbine is Q m3/s. 0.10Q m3/s volume of water do not flow over the runner blades. What further information is required to find the volumetric efficiency (numerical value) of the Kaplan turbine?