[Solved] The whirl velocity at inlet is 15 m/s and blade velocity is 10 m/s. The volume flow rate of water in 20 m3/s. Find the power output available at the shaft if the mechanical efficiency is 95% (in MW)?

Q.	The whirl velocity at inlet is 15 m/s and blade velocity is 10 m/s. The volume flow rate of water in 20 m3/s. Find the power output available at the shaft if the mechanical efficiency is 95% (in MW)?
A.	2.85
B.	3.075
C.	6.55
D.	0.285
Answer» A. 2.85

1.2k

Do you find this helpful?

View all MCQs in

Fluid Mechanics (FM)

Discussion

No comments yet

Related MCQs

The whirl velocity at inlet of a Kaplan turbine is 7.5 m/s and blade velocity is 5 m/s. The volume flow rate of water in 20 m3/s. Find the power output available at the shaft if the mechanical efficiency is 93% (in MW)?
The power available at the shaft of a Francis turbine is 1 MW. The volume flow rate of water in 25 m3/s, whirl velocity at inlet is 10 m/s and blade velocity is 5 m/s. Find the mechanical efficiency (in %)?
The power available at the shaft of a Kaplan turbine is 0.75 MW. The volume flow rate of water in 15 m3/s, whirl velocity at inlet is 12 m/s and blade velocity is 5 m/s. Find the mechanical efficiency (in %)?
Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed:
The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).
The desired hydraulic efficiency of a turbine is 80% at a whirl velocity of 20 m/s and a head of 100 m. What should be the blade velocity of the turbine at inlet in m/s?
The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.