[Solved] In the outlet velocity triangle of a Kaplan turbine, β2 = 30o. Vf2 = 5 m/s. What is the relative velocity of the flow at outlet?

Q.	In the outlet velocity triangle of a Kaplan turbine, β2 = 30o. Vf2 = 5 m/s. What is the relative velocity of the flow at outlet?
A.	10 m/s
B.	5.77 m/s
C.	8.66 m/s
D.	2.88 m/s
Answer» A. 10 m/s

873

Do you find this helpful?

View all MCQs in

Fluid Mechanics (FM)

Discussion

No comments yet

Related MCQs

In the inlet velocity triangle of a Kaplan turbine, α1 = 45o. The velocity of flow at inlet = 10 m/s. Find the whirl velocity of water at the inlet of Kaplan turbine?
The velocity of the flow at the inlet of Kaplan turbine is V. In an experimental setup, what could be the possible value of the velocity of the flow at the outlet of Kaplan turbine?
The relative velocity of water at the inlet of the Kaplan turbine is 7 m/s. β1 = 75o. The whirl velocity of the water at inlet is 10 m/s. Find the blade velocity of the turbine?
The volume flow rate into a Kaplan turbine is Q m3/s. 0.10Q m3/s volume of water do not flow over the runner blades. What further information is required to find the volumetric efficiency (numerical value) of the Kaplan turbine?
The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
The velocity of flow through a Kaplan turbine is 10 m/s. The outer diameter of the runner is 4 m and the hub diameter is 2 m. Find the volume flow rate of the turbine in m3/s?
Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).
For a Kaplan turbine, the whirl velocity at inlet of the turbine is given to be 18 m/s. The blade velocity is given as 25 m/s. What is the hydraulic efficiency for a head of 50 m. Take g = 10 m/s2?