For the figure given below, find the missing terms in the order of (1), (2), (3) and (4).

Related MCQs

• In the figure shown below, which of the following type of runners has the blade curvature as shown in the above figure (The arrow denotes direction of blade motion)?
• In the figure shown below,which of the following angles replace the question mark?
• A vertical rectangular plane surface is submerged in water such that its top and bottom surfaces are 1.5 m and 6.0 m res-pectively below the free surface. The position of center of pressure below the free surface will be at a distance of
• The volumetric efficiency of a given turbine is 80%. If volume flow rate of water in given to be 30 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?
• 95*40 = 38 m3/s. 358. In a Kaplan turbine experiment, the volumetric efficiency of a given turbine is 91%. If volume flow rate of water in given to be 35 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?
• Find the diameter of jet D, if jet ratio m and diameter of jet d are given as 10 and 125mm.
• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• Water flow velocity is given 10 m/s. The runner diameter is 3 m and the width of the wheel is 25 cm. Find the mass of water (kg) flowing across the runner per second.
• The flow ratio of a Kaplan turbine is given as 0.7. The available head is 30 m. The outer diameter of the runner is 3.5 m and the hub diameter is 2 m. Find the volume of water flowing through the turbine per second (m3/s)?
• ation Select the correct answer using the codes given below: