In a Sutro weir, the discharge is proportional to (where H is head.)

Related MCQs

• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• The discharge over a broad crested weir is maximum when the depth of (where H is the available head.) flow is
• Unit discharge is the discharge through the turbine when the head of the turbine is
• Due to each end contraction, the discharge of rectangular sharp crested weir is reduced by
• The maximum discharge over a broad crested weir is
• High head, low head and medium head turbines are classified based on
• Unit discharge is directly proportional to              
• The higher discharge valve line holds the discharge valve                
• A quantity of fluid that leaks from a higher pressure discharge to a lower pressure discharge is called            
• The loss of pressure head in case of laminar flow is proportional to