McqMate

Q. |
## A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2 |

A. | 171 |

B. | 181 |

C. | 191 |

D. | 201 |

Answer» A. 171 |

3k

0

Do you find this helpful?

3

View all MCQs in

Dynamics of MachineryNo comments yet

- A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a two node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
- In a gearing system, pump speed is one third of the motor. Shaft from motor is 6 cm in diameter and 30cm long, the impellar shaft is 10cm diameter and 60cm long. Mass moment of inertia is 1500 Kgm2, C = 80Gn/m2. Neglecting the inertia of shaft and gears calculate the frequency of free torsional vibrations in Hz.
- The mass moment of inertia of the two motors in a two rotor system are 100 kgm2 and 10 kgm2 the length of the shaft of uniform
- Consider the following statements: Two rotors mounted on a single shaft can be considered to be equivalent to a geared-shaft system having two rotors provided 1. The kinetic energy of the equivalent system is equal to that of the original system. 2. The strain energy of the equivalent system is equal to that of the original system. 3. The shaft diameters of the two systems are equal. Which of these statements are correct?
- Two rotors A and B are connected to the two ends of a shaft of uniform diameter. The mass moment of inertia of rotor A about the
- Keeping the mass moment of inertia of both the shafts in a two rotor system same, if the length of one shaft is doubled what should be the effect on the length of other shaft?
- For a two rotor system, the mass moment of inertia of one shaft(A) is twice the other(B), then what is the relation between the length of the shafts.
- From the given data, find the balancing mass in Kg if r=0.2m required in the same plane.Masses = 200kg, 300kg, 240 kg, 260Kg, corresponding radii = 0.2m, 0.15m, 0.25m and 0.3m.Angles between consecutive masses = 45, 75 and 135 degrees.
- For occurrence of free torsional vibration in a three rotor system which of the condition is necessary?
- For a vibration system having different shaft parameters, calculate which of the following cannot be the diameter of the equivalent shaft if the diameters of shafts in m are: 0.05, 0.06, 0.07.