McqMate

Q. |
## From the given data, find the balancing mass in Kg if r=0.2m required in the same plane.Masses = 200kg, 300kg, 240 kg, 260Kg, corresponding radii = 0.2m, 0.15m, 0.25m and 0.3m.Angles between consecutive masses = 45, 75 and 135 degrees. |

A. | 116 |

B. | 58 |

C. | 232 |

D. | 140 |

Answer» A. 116 |

1.3k

0

Do you find this helpful?

1

View all MCQs in

Dynamics of MachineryNo comments yet

- From the given data, find the balancing mass’s inclination in degrees if r=0.2m required in the same plane.Masses = 200kg, 300kg, 240 kg, 260Kg,
- Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.
- If all the masses are in one plane, then what is the maximum no. of masses which can be placed in the same plane?
- Which of the following statements are associated with complete dynamic balancing of rotating systems? 1. Resultant couple due to all inertia forces is zero. 2. Support reactions due to forces are zero but not due to couples . 3. The system is automatically statically balanced. 4. Centre of masses of the system lies on the axis of rotation.
- A vertical spring-mass system has a mass of 0.5 kg and an initial deflection of 0.2 cm. Find the spring stiffness.
- A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 11.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
- A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 23 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
- A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 34.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
- In the given figure, m1=10 Kg, m2=30Kg and m=50 Kg, if r=0.3m, l=1m, find l2 = 0.5m, find r1 in m.
- From the given data, calculate the unbalanced centrifugal force in N s2 Distance from shaft = 0.2 m Mass = 100 kg Rotating speed = 1000 rpm.