[Solved] unused component in the machine, then we must

McqMate

Q.	unused component in the machine, then we must
A.	s/p/2 should not be an integer
B.	s/p/2 should be integer
C.	s/p should be integer
D.	s/p should not be an integer
Answer» A. s/p/2 should not be an integer
Explanation: if slots per pole pair is not integer than all the winding will be completed without adding any dummy coil.

559

0

Do you find this helpful?

3

View all MCQs in

Electrical Drives and Controls (EDC)

Discussion

No comments yet

Related MCQs

A 6-pole lap wound DC generator has a developed power of P watts and brush voltage of E volts. Three adjacent brushes of the machine had been found worn out and got open circuited. If the machine is operated with the remaining brushes, voltage and power that could be obtained from the machine are
A dc machine is run at rated speed in forward direction and then in backward direction. It is observed that, speeds of the rotation are different, then it leads to the conclusion of
A dc machine is run at rated speed in forward direction and then in backward direction. It is observed that, speeds of the rotation are different, then it leads to the conclusion of
For a dc machine, its commutator has a diameter of 50 c rotating at 1000 rpm. For a brush width of 1 cm, the time commutation taken by the machine will be
A 200V dc machine has 4 poles and 40 coils, having simplex lap winding. The number of commutator segments which required in the given machine will be?
For a dc machine, its commutator has a diameter of 50 c rotating at 1000 rpm. For a brush width of 1 cm, the time commutation taken by the machine will be
Torque inversely varies with the speed in the windage load torque component.
voltage of a dc machine is a function of its magneto-motive force.
with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?
Passive torques always oppose the motion of the driven machine.