In latitude 25.0 S, SA (spin axis) of a FG (free gyro) is in position S40E and horizontal. Find the tilt after 6 hours.

Related MCQs

• A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be
• 45 N/mm2. The connecting rod length between centres is 1.2 m and the cylinder bore is 0.5 m. If the engine runs at 250 r.p.m. and if the effect of piston rod diameter is neglected, calculate the net load on piston.
• In a slider crank mechanism, the length of the crank and connecting rod are 180 mm and 540 mm respectively. The crank position is 45° from inner dead centre. The crank shaft speed is 450 r.p.m. (clockwise), calculate angular velocity of the connecting rod in rad/s.
• Centre of masses of the system lies on the axis of rotation.
• Power is transmitted by an electric motor to a machine by using a belt drive. The tensions on the tight and slack side of the belt are 2200 N and 1000 N respectively and diameter of the pulley is 600 mm. If speed of the motor is 1500 r.p.m, find the power transmitted.
• In a horizontal engine, reciprocating parts are accelerated when the piston moves from
• In a horizontal engine, reciprocating parts are retarded when the piston moves from
• In a horizontal engine, the weight of the reciprocating parts also add/subtract to the piston effort.
• At null position, galvanometer reading will be                                
• Which of the following is the Wireless battery-free sensor?