According to ASTM E709-95, Table 3., alternating current electromagnetic yokes must have a lifting force of at least:

Related MCQs

• According to ASTM E709-95, Table 3., direct current electromagnetic yokes must have a lifting force of at least:
• According to ASTM E709-95 direct current electromagnetic yokes should have a lifting force of at least:
• According to ASMT E709-95 alternating current electromagnetic yokes should give a lifting force of at least:
• According to ASTM E709-95 when fluorescent particles are used, the bulb shall be warmed up prior to use for at least:
• According to ASTM E709-95 when applying fluorescent magnetic particles technique, the operator shall be in darkness area at least......................prior to examination:
• According to ASTM E709-95 and API, the UV intensity measured at a minimum of 38 cm (15 inches) at least shall not be less than:
• According to ASTM E709-95 and API, when fluorescent particles are used, the UV bulb shall warm up prior to use for at least:
• According to ASTM E709-95 in using prod technique on a 50 mm thickness plate with a prod spacing of 101 mm (4 inches), current shall be selected in the following range:
• According to ASTM E709-95, with wet continuous magnetization technique, the duration of magnetization current is of the order of:
• According to ASTM E709-95 in using prods having a spacing of 19 mm (3/4 inches) and above, the magnetizing current shall be: